PD Rotomouldings is a leading manufacturer of materials handling containers to industry. Having supplied over 150,000 containers over the past 30 years, we have built up a comprehensive range of IBC's, tanks, drums, palletubs and recycling containers in many shapes and sizes to suit a wide variety of applications in different industries. This is just a small sample of our comprehensive range of IBCs and other containers for the storage and transport of liquids and dry products.

If none of our standard containers meet your requirements let us design one for your exact needs. Rotomoulding tooling is low cost an special tooling can be justified for small volume production runs.

 

AquaCubes
1100 Litre ULCG & 1800 Litre ULCG

1100 & 1800 Ltr. tanks approved by the secretary of state under regulation 31 of the water supply regulations 2000 for use in public water supplies & ISO 9001 quality standard certified.

1100 Litre ULCG

Special Features:

  • Fitted with 1m x 1.2m Galvanised Frame that can be top lifted or with fork lift handles.
  • Long life UV rotationally moulded plastic.
  • Comes with lockable lid to cover inlets.
  • Can be custom made to your requirements e.g. different sizes of tapes, logos moulded into tanks.

Specifications

  • Capacity: 1100 Ltr.
  • Size: 990 mm (L) x 1190 (W) x 1740 mm (H).
  • 2.5 inch BS336 Inlet with non return valve.
  • 2 off 3/4 inch lockable supply taps.
  • 2 inch lockable drain valve.
  • Top entry manway with vent and insect screen.
  • Outer lockable cover with concealed hinges to cover manway & inlet.
  • Fork truck guides fitted to frame.
  • 4 lifting points on frame for Hiab & Skip movements.
  • 4 lashing points provided to fasten to vehicle.
  • Optional reflective markers can be fitted to frame.
1100 Ltr. AquaCube
Dog Guard
Reflected

1800 Litre ULCG

Specifications

  • Size: 2292mm (L) x 1420mm (W) x 1105mm (H) (without dolly).
  • Capacity: 1800 Litre.
  • Galvanised frame to BS729.
  • 2.5 inch BS336 Inlet with non return valve.
  • 2 inch lockable drain valve.
  • 2 off 3/4 inch lockable supply taps.
  • Top entry manway with vent and insect screen.
  • Outer lockable cover with concealed hinges to cover manway & inlet.
  • Fork truck guides fitted to frame.
  • 4 lifting points on frame for Hiab & Skip movements.
  • 4 lashing points provided to fasten to vehicle.
  • Optional reflective markers can be fitted to frame.
  • Optional level gauge.
  • Optional as a bowser or trailer mounted tank.
 
Inlet manway, filling port
& non return valve
Open Lid
Outlet taps & Outlet Valve
Frame

Polytanks  


Polytanks are tough weatherproof polyethylene tanks for use anywhere liquids are stored or moved. Light enough to be lifted empty by hand thye can be transported on trailers, lorries and even estate cars and four-wheel drive vehicles (the 500 litre tank fits the short wheel based Land Rover) at a fraction of the price of a stainless steel tank.

Used by all the major water companies and the British Army for transporting drinking water, polytanks are approved for transporting drinking water, Polytanks are approved for transporting milk as well as diesel, oil, and most chemicals.

Fully approved by M.M.B. (Milk Marketing Board) for emergency milk collection and bail milking

PD Rotomouldings have made tens of thousands of Polytanks over the last 30 years. Polytanks are used by NATO, Milk Marketing Board, Central Electricity Generating Board, UK Atomic Energy Authority, Regional Water Authorities, many major chemical companies and several thousand farmers. Polytanks are used in the snow of Scotland and Scandinavia to the heat of the Arabian Gulf desert

Features:

  • Tough, weatherproof, will not rust / Food grade polythene with excellent insulation properties / Light enough to be lifted by hand / Can be fitted with valves and piped together

PD Application and container Range

APPLICATION

PRODUCT

Dry Powders and Granules

Durabin IBC's - Tubs, Skips and Palletubs, Drums

Carbon Black

Durabin 79 Specialized IBC

Liquids

Transitank IBC's = Polytanks, tanks, bunded-tanks & Bowsers

Custom Mouldings

Containers manufactured to your specification

Waste Oil / Glass / Cans

PD Recycling Range of Products

Click below to go to the appropriate page...

Recycling

Durabins

BundyBank

Oilcan Bank

Plastibank

Can-Can

Custom Mouldings

IBC's

Battery Bank

Transitanks

Bottle Bank

Rigidrums

Bowsers


PD Rotomouldings , Maes Y Clawdd Ind. Est., Maesbury Road, Oswestry, Shropshire SY10 8NN, United Kingdom

Tel: +44 (0)1691 659905 Fax: +44 (0)1691 659344
... Click here to send E-mail : sales@pdrotomouldings.co.uk